T-DRILL Tube Collaring Machine

  • $24,000.00
sku: 17117

Model: EC-150
Voltage: 220 volts
Phase: 3
Collaring range: 21.3-168.3 mm 1/2-6" IPS
Run tube: 1-16" IPS with pulls throughout 360 degrees
Wall thicknesses: from 1.6 to sch 10
Pulling capacity: 12 mm O.D up to 168 mm O.D.

Included components:
Small spindle
Medium spindle
Assorted shims
Assorted large washers
2 x ring washers

Clamps: 57 x 2, 42 x 2, 70 x 2, 88.9 x 2, 108 x 2 (4ID), 133 x 2, 159 x 2, 209.5 x 2, 273 x 2, 323.9 x 2

Cutters: 55 - 74, 42 - 54, 75 - 90, 91 - 105, 106 - 133, 139 - 168

End Mills: 90-168.3

T-Drill Collaring method for tube branching by butt-welding has 3 steps:

1. First an elliptical pilot hole is milled. TEC-150 makes the correct size according to parameters being stored to the memory.
2. Once the pilot hole is ready, the milling unit can be pushed back position and collaring tool will be lifted to the TEC-150. Collaring cycle can be started.
3. When collar is ready, the top surface of the formed collar needs to be faced to secure proper butt-welding.


Country Of Origin: FINLAND
S/N: 91195
Dimensions: 71.00 X 40.00 X 67.00 feet
Weight: 2200.00 lb

Related Products