Hours & Maintenance:
-
Current Hours: 63,571 Hrs
-
Major Maintenance (Last Completed): Major Overhaul/Rebuild - Completed at 40,821 Hrs
-
Major Maintenance (Next Due): Mid-Life Overhaul - Past Due by 2,750 Hrs
-
This generator set was regularly maintained, with regular preventative maintenance completed at 250/500/1000/2000/4000/8000 hour intervals.
-
Full service history is available, upon request.
Diesel Engine Specifications:
-
Manufacture: Caterpillar
-
Serial No.: TDX00135
-
Engine Model: C280-16
-
Arrangement No.: 3164408
-
Performance Specification: 0K8494
-
Engine Rotation: CC
-
Max. Altitude: 150 m
-
Power: 4600 kW at 900 rpm
-
Bare Engine High Idle: 909 rpm
-
Fuel Load Fueling: 2780 cu. mm
-
Fuel Timing: 118.2 mm
-
Aspiration: Turbocharged-Aftercooled
-
Governor: Electronic
Synchronous AC Generator Specifications:
-
Manufacture: Kato Engineering
-
Serial: 19815-02
-
Code: 8P12-4700
-
Model: AA28072000
-
Power: 4400 kW
-
Apparent Power: 5500 kVA
-
Power Factor: 0.8
-
RPM: 900 rpm
-
Voltage: 7968/13800 Volts
-
Phase: 3
-
Current: 230 A
-
Rotation: CWFDE
-
Enclosure: ODP
Additional Resources:
-
PDF Engine Specifications Sheet
-
PDF Drawings Package
Primary:
-
(1) CAT 4.4MW Diesel Engine C280-16
-
(1) KATO 4.4MW AC Generator/Alternator
-
(1) FINNING Engine Interface Panel (EIP)
-
(1) Surge Cabinet
Auxiliary & Supporting:
-
Radiator Cooling Package
-
Fuel/Oil Cooling System
-
Engine Preheating System
-
Heat Recovery/Sootblower System
-
Combustion Air Intake System
-
Pre-Lube & Engine Fluid Pump System
Optional Add-Ons - Supporting Electrical Equipment:
SKU 156803 - 3700-IP-0094: Control System Lineup
-
Listing Link: Click Here
-
Description: CAT/FINNING 6-Genset Synchronizing/Generator Control Panels (GCP) w/ DCS & Bus-Tie Control
SKU 156802 - 3700-91-0049: 13.8kV Switchgear
-
Listing Link: Click Here
-
Description: GE/POWELL Power/Vac 15kV 3000A Medium Voltage Metal-Clad Switchgear Lineup, 15-Sections
SKU 156804 - 3700-92-050(1): 600V Motor Control Center
-
Listing Link: Click Here
-
Description: EATON/CUTLER-HAMMER Advantage 2100 MCC, 600V, 3-Ph, 1200A, 15-Sections
SKU 156805 - 3700-92-050(2): 600V Motor Control Center
-
Listing Link: Click Here
-
Description: EATON/CUTLER-HAMMER Advantage 2100 MCC, 600V, 3-Ph, 1200A, 9-Sections
SKU 156806 - 3700-92-051: 600V Motor Control Center
-
Listing Link: Click Here
-
Description: EATON/CUTLER-HAMMER Advantage 2100 MCC, 600V, 3-Ph, 1200A, 14-Sections
SKU 156807 - 3700-90-0050: 1MVA Transformer
-
Listing Link: Click Here
-
Description: DELTA 1000/1333/1533 kVA Dry-Type Transformer, 13.8 kV to 600Y/346 V, ANN/AFN Cooling
SKU 156808 - 3700-91-0050: 600V Switchgear
-
Listing Link: Click Here
-
Description: EATON/CUTLER-HAMMER MAGNUM DS LV Switchgear, 600/346V, 1600A w/ (5) 1600A Breakers
SKU 156801: 13.8kV Neutral Ground Resistor (NGR)
-
Listing Link: Click Here
-
Description: POWEROHM RESISTORS 13.8kV Neutral Ground Resistor, 8kV L-N, 40/50/60 A, 10-Second Duty
|