|
Features:
-
12" touch screen control capable of storing machine settings
-
Automatic machine adjustments to certain units by servo and pneumatic controls
-
Auto setting infeed fence according to the edge thickness being applied
-
Narrow part insertion device to ensure panels are fed squarely into the machine
-
1.5 litre Teflon coated glue pot with quick heating time of 5-6 minutes
-
Quick change system allows for fast exchange of the glue pot when using different color glues or different glues (when extra glue pot(s) are ordered)
-
Screw Glue Roller system allows for proper glue delivery of higher viscosity glues like Polypropylene resulting in virtually invisible glue joints
-
Dual motor end trim with pneumatic inclination from the control system
-
High frequency top & bottom edge trimming units with servo setting
-
Counter rotating diamond pre-milling cutters to ensure an optimum edge for high quality joints
-
Corner rounding unit for finishing the ends of the panel with pneumatic 2-position dual radius selection from the control panel
-
Glue scraping system to remove any excess glue to eliminate any re-working of the panel
-
Buffing unit to polish edges after machining
-
Nesting rollers for proper machining of doors with hinge holes already process
-
Riepe LPZ/II anti-adhesive spray system prior to pre-milling unit
-
Riepe LP163/93 polishing system before buffing unit to promote a vibrant edge
Installed Power: 10 kW
Edge Thickness: 0.4 - 3 mm
Min. Panel Length: 90/300 mm
Min. Panel Length w/ Rounding Unit: 130 mm
Min. Panel Width: 90/100 mm
Min. Panel Width w/ Rounding Unit: 300 mm
Max. Panel Thickness w/ Pre-milling: 50 mm
Max Panel Thickness w/ Rounding Unit: 50 mm
Max. Panel Thickness w/o Pre-milling or Rounding: 50 mm
Min. Panel Thickness: 10/12 mm
Working Speed: 9 m/min
Dust Outlets: Nr. 02, 150 mm diameter
Pneumatic Operating Pressure: 6 bar
Footprint: 4150 mm length x 700 mm width x 1400 mm height
Machine Weight: 1280 kg (2821 lbs)
Hours: 2500 hrs (approx.)
|
